It’s enjoyable and simple to express yourself by personalizing your Crocs, but if you’re seeking for a certain design, Croc Jibbitz or charms may become very pricey. However, if you take on a little DIY project, you may use your imagination to create a number of Croc charms at a much lower price! This post will outline 4 simple, low-cost alternatives for you to create your own pokemon croc charms. There is a technique for everyone, from polymer clay to Shrinky Dinks.
Things To Be Aware Of
Print the required pattern on Shrinky Dink paper and bake for 3 to 5 minutes at 300 °F (149 °C).
Alternately, make a charm out of some jewelry, plastic jewels, or buttons. Alternately, print digital photos and create charms out of them using epoxy dots. Make handcrafted charms from polymer clay as an alternative. Make sure your charm’s back is flat so you can attach it to the backdrop. Attach your charm with glue to a Jibbitz backer. After giving the adhesive 24 hours to dry, attach the charm to your Crocs.
Print pictures that are 4 inches (10 cm) wide on Shrinky Dinks Ink Jet paper. The only thing you need to do to create Shrinky Dinks is to sketch your design on paper. They are a very interesting craft product that shrinks enormous pictures or drawings into little plastic pieces. Find images for your charms, then add them to a Word, InDesign, or Photoshop document that can be printed. To prevent the design from being too black when it is reduced in size, lower the opacity of the photos by 20 to 30%.
- Give each picture ample room so you can cut them out.
- Pick images of your pals, a pet, a favorite movie character, or a favorite line from a book.
- As long as you can change the image’s vibrancy and print it out, it doesn’t matter what programme you use to print and format your charm designs.
- Instead of printing a design, create or paint your own using transparent Shrinky Dinks.
When printing your designs, be sure to adhere to the directions on your Shrinky Dinks since you may need to make some printer-related adjustments first. Use scissors to cut out your drawings. Cut around your printed photos with care, staying as near to their outlines as you can. Your Croc charm will generally look like this. Alternately, you may use a Cricut or Silhouette machine to cut out your designs on Shrinky Dink paper. For 3 to 5 minutes, bake your photos at 300 °F (149 °C). Use parchment paper to cover a baking sheet. Place your cut-out patterns on the sheet with a gap of about 1 inch (2.5 cm) between each one. Once your Shrinky Dinks have fully flattened out, remove them from the oven.
Take your Shrinky Dinks out of the oven and flatten them with the bottom of a glass if they are still curled after five minutes. Modge Podge should be applied thinly over your Shrinky Dinks. Using a paintbrush, cover the front of the charm with Modge Podge once the Shrinky Dinks have cooled. This preserves the picture and extends the life of your Croc charm. Use a gloss or matte finish Mod Podge; if you want your charm to stand out, use a gloss finish.
To help the charms endure longer, coat them with resin. It’s optional, but adding epoxy glue to your Croc charms may make them survive longer, particularly in damp conditions. Epoxy resin and a hardener should be used 2:1. Apply the combined resin evenly on the charm’s front using a craft stick. Before going on to the following stage, allow the resin to dry or cure for at least 24 hours. Try utilizing UV resin if you want to add resin on your Croc charm but don’t have much time. It is a quicker option that doesn’t need mixing and cures for 2 minutes under a UV light.